Daily monitoring of supply pressure, oil flow, and film thickness catches hydrostatic problems early—before accuracy is lost. Consistent readings are the sign of a healthy film.
Давление (1–10 МПа?), расход (фильтр пропускает?), толщина плёнки (3–10 мкм стабильна?).
Запишите норму и следите за дрейфом. Рост расхода при стабильном давлении — износ или загрязнение; падение давления — питание или дроссель.
Мониторинг превращает ремонт в плановый и бережёт точность.
Áp (1–10 MPa?), lưu (lọc đủ?), dày màng (3–10 μm ổn?).
Ghi trị chuẩn và xem trôi. Lưu tăng, áp giữ — mòn hoặc bẩn; áp tụt — cấp hoặc tiết lưu.
Giám sát biến sửa chữa thành định kỳ, giữ độ chính xác.
Pression (1–10 MPa?), débit (filtre suffisant?), épaisseur (3–10 μm stable?).
Noter les valeurs bonnes et surveiller la dérive. Débit montant à pression stable—usure ou saleté; pression basse—alimentation ou restrictieur.
La surveillance transforme la réparation en planifiée et protège la précision.
Druck (1–10 MPa?), Fluss (Filter ausreichend?), Filmdicke (3–10 μm stabil?).
Gutwerte notieren und Drift beobachten. Steigender Fluss bei stabilem Druck—Verschleiß oder Schmutz; fallender Druck—Versorgung oder Drossel.
Überwachung macht aus Reparatur Planung und schützt die Genauigkeit.
In routine operation, three readings summarize hydrostatic health: supply pressure (is the pump delivering 1–10 MPa as designed?), oil flow (is filtration passing enough volume?), and film thickness (is the 3–10 μm gap stable?).
Record these values when the system is known good, then watch for drift. A slowly rising flow with steady pressure can mean a widening film from wear or contamination; a falling pressure points to supply or restrictor trouble.
Because the film degrades gracefully, a monitoring routine turns maintenance from emergency repair into scheduled service—protecting the sub-micron accuracy and infinite-life promise of the bearing.
