A hydrostatic system should pre-run 10–15 minutes after startup or long shutdown. This establishes a full oil film, stabilizes temperature, and protects the non-contact surfaces from any touching.
При пуске нужно 10–15 мин, чтобы плёнка стала равномерной и полной.
Прогон как обязательный шаг после простоя бережёт ресурс.
Khi khởi động cần 10–15 phút để màng đều và đầy đủ.
Chạy trước sau khi nghỉ lâu bảo vệ tuổi thọ.
Au démarrage, il faut 10–15 min pour que le film soit uniforme et complet.
Après un long arrêt, le préchauffage protège la durée de vie.
Beim Start braucht es 10–15 min, bis der Film gleichmäßig und voll ist.
Nach langem Stillstand ist das Vorlaufen Pflicht für die Lebensdauer.
When a hydrostatic machine starts, the oil supply, filtration, and temperature loop must reach steady state before the film is uniform and complete. Running the axes for 10–15 minutes lets pressure, flow, and temperature settle so the worktable or shaft floats fully on oil.
Treating the pre-run as a fixed startup step—especially after a long shutdown—turns 'theoretically infinite life' into a reliable, repeatable reality.
