静压技术 采购's 指南: 主轴, Tables与Slides

Key Takeaways:

A practical buyer's guide to hydrostatic components: match spindle, rotary table, or slide to your process, confirm load/accuracy/speed, and plan the oil supply and maintenance up front.

September 24, 2026 Marusaku Seiko Technical Team
静压技术 采购's 指南: 主轴, Tables与Slides
Tags:
hydrostatic buyer guide buy hydrostatic spindle buy rotary table hydrostatic selection hydrostatic specification
Available Languages
🇷🇺 Русский

Руководство покупателя гидростатики: шпиндели, столы, каретки

С процесса

Шпиндель — для вращения, стол — для поворота, каретка — для линейного. Все на плёнке.

Три числа

  • Нагрузка: стол φ630 мм — 1000 кг при 3,5–4 МПа.
  • Точность: ±0,001 мм, биение ≤0,1 мкм.
  • Скорость: от нуля до десятков тысяч об/мин.

План

Предусмотрите насос, фильтр NAS 5, термостат. Уход: масло ~2000 ч, фильтр ~500 ч, прогон 10–15 мин.

🇻🇳 Tiếng Việt

Cẩm nang mua thủy tĩnh: trục, bàn và slide

Từ quy trình

Trục cho xoay, bàn cho quay, slide cho tuyến tính. Cùng nguyên lý màng.

Ba số

  • Tải: bàn φ630 mm — 1000 kg ở 3,5–4 MPa.
  • Độ chính xác: ±0,001 mm, biên ≤0,1 μm.
  • Tốc độ: từ 0 đến hàng vạn vòng/phút.

Kế hoạch

Chỗ và điện cho bơm, lọc NAS 5, nhiệt. Chăm sóc: dầu ~2000 h, lọc ~500 h, chạy 10–15 phút.

🇫🇷 Français

Guide d'achat hydrostatique : broches, tables et chariots

Partir du process

Broche pour rotation, table pour pivot, chariot pour linéaire—tous sur le film.

Trois chiffres

  • Charge: table φ630 mm porte 1000 kg à 3,5–4 MPa.
  • Précision: ±0,001 mm, défaut ≤0,1 μm.
  • Vitesse: de 0 à dizaines de milliers tr/min.

Planifier

Prévoir pompe, filtre NAS 5, température. Entretien: huile ~2000 h, filtre ~500 h, préchauffage 10–15 min.

🇩🇪 Deutsch

Kaufleitfaden Hydrostatik: Spindeln, Tische, Schlitten

Vom Prozess

Spindel dreht, Tisch rotiert, Schlitten linear—alle auf dem Film.

Drei Zahlen

  • Last: Tisch φ630 mm trägt 1000 kg bei 3,5–4 MPa.
  • Genauigkeit: ±0,001 mm, Rundlauf ≤0,1 μm.
  • Drehzahl: von 0 bis Zehntausende U/min.

Planen

Platz und Leistung für Pumpe, Filter NAS 5, Temperatur. Pflege: Öl ~2000 h, Filter ~500 h, Vorlauf 10–15 min.

Start 与 Process

Choose component type by what moves: 主轴用于rotating tool/workpiece, 转台用于indexed/continuous 回转, slide用于linear 轴. Each使用 same 无接触 油膜 principle.

Hydrostatic buyer guide

Confirm Three Numbers

  • Load: match capacity (e.g., φ630 mm table carries 1000 kg at 3.5–4 MPa).
  • 精度: 静压 reaches ±0.001 mm 定位与≤0.1 μm 径向跳动.
  • Speed: works from low (no 爬行)以tens的thousands的rpm采用直驱.

Plan Supply与Care

Confirm space与power用于 pump station, filtration以NAS 5,与temperature control. Budget simple but regular upkeep—oil change ~2000 h, filter ~500 h, 10–15 min pre-run. 与 该 planned, 静压带来精度与life 该 alternatives cannot.

Related Articles

[TEST] Hydrostatic Product Selection Guide
[TEST] Hydrostatic Product Selection Guide
[TEST] Hydrostatic Product Selection Guide…
[TEST] Temperature Control 35±5°C for Hydrostatic Oil
[TEST] Temperature Control 35±5°C for Hydrostatic Oil
[TEST] Temperature Control 35±5°C for Hydrostatic Oil…
[TEST] Hydrostatic vs Hydrodynamic Bearings Explained
[TEST] Hydrostatic vs Hydrodynamic Bearings Explained
[TEST] Hydrostatic vs Hydrodynamic Bearings Explained…
[TEST] Infinite Life of Hydrostatic Bearings
[TEST] Infinite Life of Hydrostatic Bearings
[TEST] Infinite Life of Hydrostatic Bearings…